Author: admin

Went to the track Sunday for the 1st time since 1976. Brought back lots of memories of a younger, more foolish me. Age has mellowed me out a little, but I think I’ve got that itch to spin my tires again. :burnout:

It’s 1/8 mile bracket racing, and pretty much anything goes. This weekend had bikes, snowsleds, 4 wheelers, cars and trucks, running low 5’s to 12’s. There was a turbo Yamaha sled that ran 5.28/138, and he had to let off at 330′ to get traction. A couple other sleds ran mid 5’s, as…

MP Purple Shaft .450″/.455″ cam (no lifters)- 45.00

Moroso valve covers (were originally gold anodized, but have been stripped and painted Hemi-Orange)- 20.00

Carter AVS 4 bbl. carb. (removed from ’69 340, needs complete rebuild)- 20.00

Carter Thermoquad 4 bbl. carb. (removed from ’79 318, in running condition, but probably should be rebuilt)- 20.00

Cloyes single roller timing set (new but out of box)- 10.00

318 A/C Factory 4 piston calipers power Disc Brakes on the front. Manual steering. The factory AM radip is there and looks New and works like new! Everything is numbers matching except 3 items! The intake,Carb, air cleaner That’s it! This 1971 Duster is a body mans dream and an A body Mopar lovers too!
The interior is like New and I mean headliner and all. There is one small issue with the carpet and you can’t see it with floor mats in the car!
The Color is very rare for the interior as…

Posted this on another Mopar site and got no response…..

I have a ’64 Barracuda that I’m about to put my 8 & 3/4 under. I’d like to move it to the rear by an inch in order to gain tire clearance at the front of the wheel well and 1/4 panel. HD A body springs to be used. Mancini’s site lists part # MREAR0104 (Spring Hanger Set E body with Super Stock springs). Will this do the trick? By my guesstimate the A and E body bolt pattern for the four mounting studs is the same. I’m guessing…

Things i need for a 69 barracuda:

-Front end nose piece
-grill
-front seats

I have found a very gently used 413 that is currently in a 1970 Dodge RV. Could this engine be converted and used for good street car? What are the differences between an RV version and the automobile version? Thanks,Dan

Brand new in the box NEVER installed,I’m going with a different Carb. Also a used Torker intake.

I’ll take $250 for the carb location is CT and $125 for the intake.