Classic Mopar Forums

hi have a transbrake 904 drives great, but reveice goes spongie when hot and brake wont hold ,when cold all workes well ,do i need to tighten low/reverice band thanks ian

I am building solid motor mounts for my ’65 Dart (drag only). If anybody has an early “A” body with a stock 273 sitting on good stock motor mounts, I wonder if you could measure the clearance between the oil pan and the top of the “K” member? Thanks guys.

’67 Dodge Dart 2dr. hardtop,runs and drives,original 273 2bbl. automatic,black bench seat interior,bought new in Berkeley ,CA,clear title,currently on non-opp.,factory manual steering,front sway bar,14″ steel wheels,fender tag and dealer certi-card,very solid body. $2,000. Alan 530-934-7499 / 510-387-9467

I just installed a 1″ high composite insulator under my Holley 4BBL……..I had trouble with the gas ‘boiling’ and lousy performance after it warmed up……Spittin’ poppin’ when I nailed the throttle, and hard starts when it got hot.

I had to raise the cable clamp and spring perch a little to match it, then installed a new fuel line and insulated it where it came close to the rad hose.

Just took it out for the first time………..and I cannot BELIeVE the difference!!!!!
The throttle…

this gal has a 68 dart 4 door she needs to get rid of they are trying to buy a house the car is a slant six car and she is in Edwardsburg Michigan it will have to be hauled it is in excelaent shape it got rear ended bad thou. From the back doors forward there is no rust the interior is spotless front clip is spotless including inner fender wells and it is all there 700 bucks slant six run perfect and is a auto car e-mail her at fantasticcircush@yahoo.com she can not part car out at this time…

Hello all, I hope that you all will not have to much fun at my expense but, I am a Big Block chevy guy and have been doing this for a long time. I have been asked by a close friend that is a Mopar guy to help him out. Not being familiar with these engines, I have a few questions to ask you experts. The car is a 1970 Cuda. It weighs in at about 3800 lbs. Has a 4 speed transmission and a 3:54 rear gear. It has a 440 6 pack that has been stroked to 493 cid. Bore is 4.35, stroke is 4.150….

do you know where i can find new fenders and hood for my car . i nee lower rear fenders too .

look at what i just got …
http://www.offyparts.com/popup_image.php/pID/209 (http://secure.sm-p.com/exchweb/bin/redir.asp?URL=http://www.offyparts.com/popup_image.php/pID/209)