OEM Big Block Torque Converter & Flex Plate
This is a OEM Big Block Torque Converter & Flex Plate. It came out of
a 1969 Coronet R/T with a 440ci. engine, but will work with any BB
Mopar with a internally balanced forged crank. It is a stock original
converter, NOT a high stall converter. I…
Negative Battery Cable – Aftermarket – “Off the shelf”?
Does anyone know of a source that sells negative battery cables, with the body ground having a terminal (not a butt connector like the auto parts stores ones have) in ready made lengths? (See photo) I bought this 24-inch one 20+ years ago. Now I could …
70 AAR Bringing it back from the accident.
This story starts years ago. My buddy bought a 70 Burnt orange AAR Cuda , 4spd car from someone in the early 70’s. On his way home one night in 75 he encountered a bridge, I mean really encountered it! Evidently ice was the culprit. All he remembered was hitting the bridge and waking up in the passenger seat. He had gone from the front seat to the drivers rear seat…
8 3/4 rear seals
Probably a noob question but are there 2 seals in the end of the diff tube? I have the axle seal fitted but how do the rear bearings get lubricated and how do I stop the oil from coming out onto the backing plates…I googled some pics but Im still not…
Hurst 4 speed shifter and linkage for a 65 valiant
Looking to do a 4 speed conversion on my 65 valiant. Looking for the hurst shifter and mechanism and linkages.
Please reach out if you know of anything
318 with 3.97 cylinder bore after clean up
How do you think this will run. 6 cylinders measure .003-005 over. I got new std pistons -6cc chambers. KB hyper pistons. Lets hears what ya’ll think.
Is there a junkyard gem slant six combo?
I’m looking to build a slant six for one of my future projects. In my current inventory, I have 225s from the following years…
1967
1972
1975
1976
1979 Super Six
1980 Jasper reman
1983
So, my question is basically, is there any year that is better t…