I have a new Hemi Grind cam (P4452993) for big block, lifters (P4006767), and a new set of "hemi" valve springs (P3690933) and retainers. These had been installed in a 383 that was never completed or fired. The lifters were NOT installed, and are still in their original plastic wrapped boxes.
I removed the cam, springs, and retainers, had machine work redone to the motor, then assembled it using a different cam and springs.
Adv. Duration: .280°/280°
Dur. @ .050'': 238°/238°
Lift: .474''/.474''
Centerline: 110°
Basic RPM: 2000-5900 RPM
Bolt Pattern: 1-Bolt
$200 plus shipping.
located Greensboro N.C.
I removed the cam, springs, and retainers, had machine work redone to the motor, then assembled it using a different cam and springs.
Adv. Duration: .280°/280°
Dur. @ .050'': 238°/238°
Lift: .474''/.474''
Centerline: 110°
Basic RPM: 2000-5900 RPM
Bolt Pattern: 1-Bolt
$200 plus shipping.
located Greensboro N.C.
