I am getting pretty close to getting the 74 Duster back together and I wanted to see who could guess the closest to my ET.
It is not a perfect build by any means, I used what I had and could trade for. Being as I am broke, I am not changing a single item. Lol.
This is what I have:
-3480lbs with me and 1/2 tank of 93 octane.
-318 .030 over
-Windage tray
-9:1 CR with replacement pistons
-302 casting heads with gasket match on exhaust side.
-Edelbrock perfomer intake
-Carter 625 AVS
-Purple shaft .509 lift .292 duration CL108 with matching valve springs.
-Coan convertor 3500 stall
-Hydraulic lifters
-8 1/4 suregrip with 4.10's
-SS springs
-28" tall MT Drag Radials
-Hedman 1 5/8 headers
-2 1/2" dual exhaust with "X" pipe, DUMPS, and Magna flow "wide open" muffs.
-904 tranny with a Reverse manual VB, bolt in sprag and really good clutches.
Did I forget anything?
This was a roller block that I got with the crank and pistons already in it. I didn't have any roller lifters for it so I started looking around the garage to see what I did have. This build is what I ended up with.
I thought it might be fun to slap together and see what she will do.
So, what will she run?8)
It is not a perfect build by any means, I used what I had and could trade for. Being as I am broke, I am not changing a single item. Lol.
This is what I have:
-3480lbs with me and 1/2 tank of 93 octane.
-318 .030 over
-Windage tray
-9:1 CR with replacement pistons
-302 casting heads with gasket match on exhaust side.
-Edelbrock perfomer intake
-Carter 625 AVS
-Purple shaft .509 lift .292 duration CL108 with matching valve springs.
-Coan convertor 3500 stall
-Hydraulic lifters
-8 1/4 suregrip with 4.10's
-SS springs
-28" tall MT Drag Radials
-Hedman 1 5/8 headers
-2 1/2" dual exhaust with "X" pipe, DUMPS, and Magna flow "wide open" muffs.
-904 tranny with a Reverse manual VB, bolt in sprag and really good clutches.
Did I forget anything?
This was a roller block that I got with the crank and pistons already in it. I didn't have any roller lifters for it so I started looking around the garage to see what I did have. This build is what I ended up with.
I thought it might be fun to slap together and see what she will do.
So, what will she run?8)
