I have a 73 318 with reworked stock open chamber heads, Comp XE268 cam, Hooker super comp headers, flowmaster 40 exhaust with H pipe through 2.5" piping, holley 4160 600 cfm carb with 70 primary jets and the stock secodary plate, Edelbrock performer intake, MSD coil, orange box, and MP distributor with quicker adavance setting.
The rear is a 3.21 geared 8 1/4 and the trans is a 904 for Trans Go TF2 kit and Hughes 2500 stall.
This is what is in my Duster. It seems to do well and runs great. Its a little soft on torque until I reach about 3000 rpm, then it takes off. I have put 17000 miles on the motor since I rebuilt it in July 07.
What do you guys think for power? 280-290 horsepower?
The rear is a 3.21 geared 8 1/4 and the trans is a 904 for Trans Go TF2 kit and Hughes 2500 stall.
This is what is in my Duster. It seems to do well and runs great. Its a little soft on torque until I reach about 3000 rpm, then it takes off. I have put 17000 miles on the motor since I rebuilt it in July 07.
What do you guys think for power? 280-290 horsepower?
