Category: Engine, Trans & Driveline
4L80E behind big block Mopar
im in the process of wanting to fit a 4L80E transmission572 hemi in a 69 Dodge Charger.
Has anybody here done this conversion?
I have a tranny here and purchased a quick time BELLHOUSING to adapt it but I’m not impressed with how it needs to be attache…
Oil pressure
Can I get a true oil pressure check with a drill and shaft running to oil pump on a 440
Overdrive install possible on a ’63 727?
Question about 727 overdrive installation possibility on a ’63 PB trans. Poly 318 with some performance modifications. I’m not any expert on tranny’s. My trans was upgraded to a modern TQ and spline some 5-years ago. My first mistake was taking out the…
64-65 4 speed trans
What I need is a side picture of shifter mounting spot, I have a 69 trans with 2 different tail housings I want to use in a 65 Belvedere. Looking for the 11” bell also but I’ll put that listing in the wanted section
Thanks
Coolant from exhaust header stud bolt
Hello Mopar family,
I am hoping you can help me with a bit of a headache coolant leak. I had quite a few coolant leaks from the header bolts. I took them out and re-installed with thread sealant. That took care of all of them bar the one seen in the v…
Dana 60 Power-Lok case bolts
Going through my ‘70 Dana 60 and I was wondering if the diff case half bolts are left handed threads like the 8.75 power-lock? Factory manual is TFU Regarding Dana 60.