Hey All
Working on a 66 Polara 2dr with a 383 with stock intake. I've seen some different things, do you all stick with the 4 total gasket method (block/gasket/valleypan/gasket/intake) on each side or the 2 total gasket method (block/valleypan/gasket/intake).
We've always run 4 total gaskets, but last time we did this we had a gasket leak, where we were sucking in a large amount of air under the intake.
I think the leak was from a gasket that wasn't seated correctly, but a friend said...
Intake Gasket Recommendation
