Hi guys, I need some help here :I've always installed and removed my engines by diagonally attaching a piece of chain to the right front and left rear ends of the stock iron heads using high grade bolts and thick washers with no issues.
This time I will be using Eddy ALUMINUM heads and an LD 340 intake manifold.
Since I am not familiar with dealing with aluminum heads my question is Whether it'll be ok using a chain attached the same way as with my iron heads or should I use a lift plate , or...?
I'll appreciate your advise,especially from those of you that have already done it.
This time I will be using Eddy ALUMINUM heads and an LD 340 intake manifold.
Since I am not familiar with dealing with aluminum heads my question is Whether it'll be ok using a chain attached the same way as with my iron heads or should I use a lift plate , or...?
I'll appreciate your advise,especially from those of you that have already done it.
