Category: Transmission and Drivetrain
904 kickdown servo test
Problem is the front servo. It’s blowing air out. I took the spring and top cap (whatever it’s called) out and applied air. It blows the piston out of the bore. When there’s fluid in there will it make a difference and piston get more pressure behind it?
904 kickdown servo test
Problem is the front servo. It’s blowing air out. I took the spring and top cap (whatever it’s called) out and applied air. It blows the piston out of the bore. When there’s fluid in there will it make a difference and piston get more pressure behind it?
Anyone running the Passon 18 spline OD gearset? I am trying to make a final
I am trying to make a final decision on which way to go and I want to get some input on the OD gearset from Passon to see if they are problematic or if they are any good. I have heard good and bad about them and I have heard horror stories of bad custo…
k member engine mounts
Greetings, kind of a newbie here, I have a 71 challenger roller r/t clone , it had a motorhome 440 in it, I have access to a 70 340 , can I use the current k-member?
…
Transmission linkage
71 barracuda 318 automatic, shift on the steering column. Does anyone have pictures or diagram of the correct way these parts all go together? Got the new plastic bushings, and installed. Having trouble finding out where the other 3 go correctly.
971 Oil Pan
Getting to assembly my 440 and thought I had a 402 pan. Turns out I have a 971 and 933. Will the 971 work on Ebody? I have a skid plate on my k frame.
TIA