Category: Performance Talk

I have a 1991 ram 50. The 2.4 is really tired..and although I have had a 360 powered ram 50 in the past.. I thought a nice nice mild 200 hp 3.9 litre v6 might be perfect for this truck.

This truck already has an A500 in in so swapped a v6 A500 should be a bolt in.

Making mounts is a breeze like…

I have been using a 17084 mopar mini starter on my 340 engine. I bought this starter in 1999 and it is making a loud grinding noise a few times and not engaging until about the 3rd or 4th try. The starter has worked well until now and I was going to replace it with another. Someone suggested I…

I have recently started to build a 1990 318.I have removed the hydraulic roller cam and installed a Summit 1789 cam,lifters,pushrods,new springs,locks,retainers and seals.I have an old Streetmaster 318 intake for this engine but was wondering if using a 1″ open spacer would increase the plenum…

Hi,

I’m Tom and have a 72 Demon 340. I’m new to this forum but really need some advice. It seems my fuel gauge is Way off, when it registers E on the gauge it only takes 7 or 8 gallons to fill it and it reads full and will take no more. I take it out for a cruse and it drops to E in about 70…

Has anyone purchased these heads yet, installed them and run them? I’m several months out from installing my set. I was curious of other people’s experience with them.

I need some help/advice… Ordered a HEI distributor off Ebay for a 85 Dodge, the one that requires a external coil. Installed the dist, wiring is simple 2 wires coming off the dist +/- goes to coil and 12 volt wire to the coil + from the ignition switch bypassing the resistor, no factory wiring…

I know this is not the PT Cruiser forum but it is the most read.

2006 PT Base with dealer installed Mopar remote start system. Has worked perfectly since 2006. Now, it won’t start. Push the remote once and get one beep and lights flash. Push the second time, when it should start, two beeps and…