Author: Catfish-65
Is it time to replace my Oil Pump
Hello all, I have a question regarding my oil pump. When I first start my car (65 Polara with a 361ci auto) cold the oil pressure on the gauge is right at 40#s. After it warms up to180 degrees at an idle it drops to about 20#s, when I put it in gear i…
Seal beam headlites.
This may seem like an odd question but, If I put a hot wire to one prong and a ground wire to the other prong on a seal beem it should turn on , If I,m in error please set me straight.I,m getting power at the head lights but no lights. on all 4 lights,…
Aftermarket Amp Gauge wiring question?
I am installing an after market Amp gauge in my 65 Polara. On the back of the gauge there are 2 post left has (G) stamped beside it and right post has an (I) stamped beside it. Dose this indicate G to ground and I to hot wire when ignition is turned on…
bucket seats and floor concill for 1965 dodge custom
Just checking to see what a pair of bucket and center councel complete would be worth 1965 one year only cable shift,,, Thanks
Oil Gauge Question.
On my 65 Polara 383 I have an idiot light on the dash, that comes from back of block drivers side. A few inches toward the passenger side roughly same location on block is an Allen plug, Can I remove the plug and use a proper oil gauge and line to moun…
Seal beam headlites.
This may seem like an odd question but, If I put a hot wire to one prong and a ground wire to the other prong on a seal beem it should turn on , If I,m in error please set me straight.I,m getting power at the head lights but no lights. on all 4 lights,…
Headlight Switch.
Having some issue with headlights not working and wanted to remove te headlight switch so I can check it out and replace if need be. Problem is not sure how to remove the dash nob without breaking something. Is it screwed on or pressed on not sure. I …