Author: BudW

All (’76-89) FMJ-body differentials are interchangeable – with a couple of minor differences.

The ’76-81 FMJ 7¼” came with 2.5” (63.5 mm) tube diameters.
The 7¼” differential tube diameter bumped up to 3.0” (tapered) for ’82-89 M and J bodies.
The ’82…

From https://www.forfmjbodiesonly.com/classicmopar/threads/introducing-new-member-j-body-driver.6360/ .

High Speed Pursuit said:

. . . Pilkington Classics in Ohio has reproduction tinted windshields for $270 plus $…

Are you not able to get your FMJ into alignment (not enough provision for positive Camber)?
There are three fixes (that I know of):

The first option is to remove the upper control arm support plate (or plates, if both sides are needed) – Red arrow. …

This post is about the different alternators used on FMJ’s. The next post (same thread) will be on what is needed to retrofit another alternator onto your FMJ.

Before I get into interchangeability, I wanted to touch on five ways to get any alternator…

I was looking at my local Pull-a-Part website to check on some parts for my pickup, and ran across this:

1958 Imperial
It should have a 392 Hemi and push-button 2 speed auto in it.
For what i can see under the…

I was browsing for some parts for my ride, and ran across this:
POSI CARRIER DANA SPICER 27 SPLINE TRAC LOC DODGE CHRYSLER 8.25 INCH 10 BOLT | eBay .

Chrysler’s 8¼” differential, from ’68 to ’96 use 27-splin…

I would like to get a close up few of a Super Coupe wheel, please (like this picture, only different):

Thank you,
BudW