Author: admin
Push rod length?
Well I went to adjust valves on 340 yesterday and found a bent one.I thought they were a little tight on 2 exhaust valves to start.Does anyone know who sells different length push rods pre assembled I remember seeing a chart on here for someone who sold them now I cannot find it.Help please! Thanks Kevin.
Wheel/Tire Combo for the big block project
Haven’t been on here and a while but I’m finally getting some time to play around with the Duster so let the questions begin.
First thing I’d like to do is find a wheel/tire package for my ’72 Duster. I’m planning on putting a 383 in the car but that will come later. I’ve found some wheels I like for the car-American Racing PN 6244665 for the front and American Racing PN 625165 for the rear. The fronts are a 14X6 with 3.75″ backspacing and +6mm of offset. The rears are 15X10 with 4.00″ of…
Adding a flip top gas cap to a early a body
A member said it might be a good idea to post a few pics of the one I installed on my 66 Dart. I will post a couple of pics now, but really need to get better ones of it. I saw an article a few years back in one of the Mopar mags on how to do it, but was unable to find it again. It really was easy to do. But you do have to make a couple of cuts for the hinge and latch. Also you have to install the filler tube from the outside as it will give you the spacing you need. I will try to answer any…
Newbee from P.A.
Hi everybody,been lurking for a while.Got a 71 Duster,and crew on the ss/ah Port-a-tree cuda.8)
Where can I get a Hydraulic clutch for 383 dart
Here is what I have 68 Dart 383,4 speed,TTI headers,lakewood bellhousing.The Z bar linkage WILL NOT fit THANKS ALOT TTI….Where can I get a Hydraulic clucth kit for what I have?Kiesler Trans sell a kit for $650. I would like to find a kit cheaper.Anyone have any ideas? Thanks for the help….
Hood release – 70-72 Swinger
I put a 72 front clip on my 73, but somehow am missing the release mechanism and cable/wire tht goes to the latch. I’ve got the latch, just need the release that mounts to the left of it in the grill opening. Let me know.
Steering Column and Sun Visors
I have two sets of sun visors for sale. A tan set and a white set. Both sets are tear free.
I also have a steering column, tan, column shift, P.S. No burnt wiring, but do have the key for the switch. The steering wheel is not cracked.
One other thing, I have an oil filter angle adaptor, complete.
If interested in any of these items please E-Mail me at
william_n_66048@yahoo.com
Thanks,