Author: admin

*Merry Christmas and the Happiest of New Years to all!!*
*Kyle, Jessica, Alexa, Trevor, and Ron*

While looking on the bag for various parts I notice there is a new small block timing cover that is made so the crank seal can be replaced without…

http://www.jacquielawson.com/viewcard.asp?code=ER13610552

This, might be a streach but i have a 78 440 came out of a 73 dodge pickup, It ran when pulled but it has sat for 3 years and we pulled the heads and found some pits in the cyl. so it probably needs to be bored, I’ve ran engines with out problems with pits for miles but whose to say that wasn’t luck, I’ve had a couple of people interested off and on for 250, and have seen other cores go for around there. What i’d like to trade for is a high milage running 318 magnum. If in southern iowa or…

so i have done an oil mod installing a tube in my passenger lifter oil gally as well drilled all holes needed to suppy mains and blocked from number 1 main to driver lifter oil gally.

the question is this leaves one head supplied by a main oil gally and the driver side only supplied by the cam. the cam seems to restrict oil. have any heard of heads needing more oil with this oil kit? should i just tap the two together? but will i lose pressure just dumping oil in the heads? or do i just…

Not really sure what I need, but I’ll tell you what I have and I’m sure someone will tell me what It is.

I have a 1969 Dart Swinger and for it I am putting in a conversion for front disc brakes and rear drums from a ’73. I need the cylinder for front discs and rear drums. Complete with mounting as well If possible…

Thanks

I’m looking for a nice rear bumper for my 74 Duster.May be interested in just the guards as a consolation prize.Also need two good tailight trim bezels. Thanks!!