Author: 67 ragtop
trim clips
View attachment 504013
I am looking for a source for these trim clips on my 67 Fury they go on the trim on the bottom of the windshield and connect the trim to the cowl. I have checked eBay and the web and have found similar but they are not wide e…
Seat belt mounting 67 Fury Vert.
I am trying to mount my new seatbelts in my 67 Sport Fury convertible. I looked for a Tapped anchor plate in the sill beside the bucket seat (removed the carpet from under the sill plate and did not locate one. The coverage in the service manual is terrible, it states to look at the drawing. It looks on the drawing that it might be mounted to the bucket seat frame but that doesn’t make sense . The drawing isn’t clear at all for the Bucket seats. I located the ones for the rear seat.
Tire Pressures
What tire pressures should be run with newer radial tires. I am running 32lbs but when I read the post about tire pressure labels I saw that it was only supposed to run 24lbs if under 5 passengers. I am concerned that that could ruin a modern radial ti…
windshield replacement
I am replacing the windshield in my 67 Sport Fury convertible and need the gasket. I have prices on line from $252 Steele rubber corp. to $90. Bobs Classic Auto Glass has it for $215. Any Ideas as to what the difference is? Restoration parts has it for 195 and 90.
I have called a couple of them and the person on the phone doesn’t have a clue. I want to make sure I have what the glass place needs to install the windshield.
They are having me remove all of the trim around the windshield. Or…
Cleaning steering wheel horn buttons
I have a 1967 Sport Fury convertible that has a 3 spoke wheel. each spoke has a horn button and 1 of the buttons doesn’t work at all and the other 2 are intermittent. They did not work either until I kept pushing them. now they only work in certain spots. If I ground the horn ring in the center of the wheel the horn works great.
How do I remove the buttons off of the wheel so I can clean the electrical contacts beneath the buttons? am currently trying to get electrical contact cleaner to…
Stock 383 2 bbl idle sound.
Quick question, Does the stock 270 Hp 383 in 1967 have a slight lope to it. I did notice in the service manual that it looks like it has about a 214 intake and 224 exhaust at .050 lift. That is if I did my math correctly. Anyway I just got this car ru…
installing new motor mount on 383
I am installing a new left side motor mount on my Fury, after I installed it onto the engine it will not drop back into the frame. The mount is straddling the bracket but the pin will not slide into the hole. t is about an eighth of an inch off to the rear of the hole. The front side of the pin is even with the hole. I don’t have enough room to swing my
mini sledge where is a good place to try to pry the engine forward. I did see a video on you tube where they just started it and let it…