Author: 1970FuryConv

I’m wondering if the isolator can be deleted without welding on a new spring perch.
My 1971 Fury has a large centering opening for the isolator. Hard to get a pic.

Opening for isolated spring perch. Pic from 1…

I need to remove the cable guard fitting from the bracket at the subframe. I can’t figure out how the rear edge of the fitting for the guard at the bracket, can be retracted so it can be pulled through the bracket. I thought of using a small hose clamp…

1973 Torsion Bars: Both are still installed on the car. The tension on both torsion bars is the same. The left side, driver’s-side torsion bar has a significant bend. I used my three-foot straight edge and I believe there is a bend of approximately ½ i…

Asking for a friend, he has a 1965 Fury Convertible. He wants to put a bench seat from a 1973 fuselage car into his car.

Is a 1973 c-body front bench seat too wide for a 1965 Fury?

Will a later fuselage bench seat fit on 1965 seat brackets?

Thanks!

Goal: 1970 Fury Convertible, replace the headlight switch without taking the dash apart.

The headlight switch is held against the back of the plastic dash panel, instrument panel, with 2 screws which in my car go through the lower hole on each side of…

1969 – 1970 Plymouth Fury remote mirror. Casting number on base is 2935873. Driver quality. Cables work properly. The chrome has light pitting. The mirror has some light horizontal scratches, depends on angle whether they show. Overall okay driver qual…

I have 2935873 remote driver side mirror. I think it’s 1969-1970 Plymouth based on internet research. P# does not appear in my 1969-1971 parts books.
Can anyone confirm? If not, tell me what it fits?
Thanks,

…