Author: 1970FuryConv
Oil Cap Rubber Seal Source?
Oil Cap from 1970s Big Block Valve Covers. Ditching the cheap chrome junk valve covers and going back to stock.
Oil cap Rubber Seal was rock hard. 1st pic on right. Where can I buy a new Rubber Seal?
just FYI. VHT SP 100 sprays on normal.
Duplicolor…
Dental Insurance, Is it a rip off?
Okay right now I have a Renaissance dental insurance program that costs me $462 per year.
I have a check up every 6 months. The first dental check up costs $120 and includes cleaning and examination. The 2nd costs $180 and includes cleaning, examinatio…
Road Wheels, Value?
I borrowed this picture above from another thread. What are a set of 5 of these worth if in excellent condition including center caps and trim rings? Considering stock looking rims for my 1970 Fury.
Current rims below. They actually don’t look as good as this picture makes them look. Rust issues. Thanks, Ben
1971 Fury, Vapor Separator Plugged
Clogged Vapor Separator, 4 vent gas tank. Clogged at output port. Output port visible in second pic. Vent ports are not clogged.
Tried rust penetrant. Tried wires and brushes. No help. What do you do to unclog a vapor separator? Soak it in carb cleane…
1971 Rear Wheel Cylinder, Rubber End Caps
I am rebuilding the rear brake wheel cylinders for my 1971 Plymouth fury.
I purchased NAPA rebuild kit 491. The rubber end caps are too big and will not attach to the end of the wheel cylinder. Store manager tried to help, but found nothing.
I’m lookin…
Radio Compatibility Chart
Some memory is telling me that 1969-1971 c-body radios have a different curvature than 1972-1973 c-body radios. Is that true?
@halifaxhops posted this chart on FABO.
1972 – 1973 pn are the same. 1971 is different
2580 766 MoPar 1968 Imperial Search tu…
Sway Bar Link Bushings, 1971 Fury GT
I am doing a suspension rebuild on my 1971 Fury GT.
Front sway bar has a broken link on the right side, as you can see in the picture.
Most fuselage sway bars are 7/8 inch diameter, at least that I have seen.
The original 1971 Fury GT sway bar is 15/16…