Author: 1970FuryConv

I need to buy the wheel seal for the inner wheel bearing on 1971 Fury with factory front disk brakes. 1969-1972 are the same. 1973 and later is different.
NAPA has seal number 17110
National Oil Seals has 8121S
Would either of these work? What seal wor…

I’ve seen some questions about rebuilders for steering gears. On the rec of @Big_John & @Trace 300 Hurst , I went with Firm Feel. The turnaround for the rebuild is 6 weeks in the shop plus ship. Given that I didn’t want to have my 1970 Fury convert…

Firm Feel offers these greaseable pivot shafts. I haven’t installed a lower control arm in a while, but I remember using wheel bearing grease in the cavity through the front subframe. FSM wasn’t much help.
What grease are you using?
Is there any reason…

If you look at the 1st 2 pictures you can see that the previous owner of my car put aftermarket tint on the side and rear glass. There are 2 problems with this tint.

The 1st is that it was so dark that I couldn’t see out the rear window at night, usin…

Anyone have a source and part number for a new vented gas cap for 1971 Fury?

Tried Van’s which has an A-body vented cap, but not sure if that will work

FSM calls for vented. Thanks

I was trying to match up a correct fuel tank filler neck for my 1971 Fury. I got a filler neck from a 1973 Dodge. I think they are a match but the 71 Fury mounting bracket may be taller, so 73 filler neck does not bolt in.
Anyone have a Hollander manua…

1973 Dodge Monaco factory radio question.
Input voltage is 12.6V direct voltage
Output voltage at left rear speaker is 31V to 0V alternating voltage. There is no direct voltage at speaker or fader.
Does the radio have a transformer internally that conv…