I need some help identifying these lifters.
I'm really starting to suspect they are solid lifters.
see the below thread for the whole story.
http://www.forabodiesonly.com/mopar/...ad.php?t=92471
I took the rocker assembly off the head and took the pushrods out. They are 7.5 inches tall (as far as i know the hydraulic pushrods for a 340 engine with adjustable pushrods were 7.25 inch tall, the solid lifters out of a 273 with adjustable pushrods are 7.343 inches tall) They usually use taller pushrods for solid lifters since the pushrod seat on the lifter is further down in a solid lifter than in a hydraulic lifter correct?
Below is a picture of the lifter (picture taken through the head) The lifters look like they aren't collapsed, they are all up against the c-clips. Do these look like solid lifters to you guys...?
Really need some help figuring this out...
I'm really starting to suspect they are solid lifters.
see the below thread for the whole story.
http://www.forabodiesonly.com/mopar/...ad.php?t=92471
I took the rocker assembly off the head and took the pushrods out. They are 7.5 inches tall (as far as i know the hydraulic pushrods for a 340 engine with adjustable pushrods were 7.25 inch tall, the solid lifters out of a 273 with adjustable pushrods are 7.343 inches tall) They usually use taller pushrods for solid lifters since the pushrod seat on the lifter is further down in a solid lifter than in a hydraulic lifter correct?
Below is a picture of the lifter (picture taken through the head) The lifters look like they aren't collapsed, they are all up against the c-clips. Do these look like solid lifters to you guys...?
Really need some help figuring this out...