Classic Mopar Forums

I need a small block bell housing w/fork if possible. If anyone has one, let me know.
Thanks,
Rob

need electronic dist for 225/6 and hd leaf springs
have air shocks and shocks have gone bad after 5 years so i am going to change out sagging springs

anyone have a electronic dist for 225 /6

Just got back from the Dade City Florida cruise-in this afternoon, and I saw one of the greatest Valiant’s I’ve ever seen……….

It was a 68 or 9 (I think) Valiant 2 door post, Burgundy in color, with what I think was a 340 stuffed in it……….Full roll cage, 4 speed pistol grip, fully gauged dash, 8-3/4 rear, lowered front end, and a set of 9″ street radials stuffed UNDER the rear fender lips………..Tach on the column……..Man!

This car was obviously set up for 1/4…

On my caliper’s there are 4 bleed screws, one on each corner.
When you bleed the system which one or one’s do you loosen to bleed?

Tried the wilwood site ,but still waiting for them to answer………………

Tim

Here is a question I hope some one can answer. I’m putting together my rear axle and installing moser axles. Do I loose the thrust blocks with the cone style sure grip as the mosers go all the way in?

Thanks

Ok, so I took some time and ripped out the carpet… Overall the condition is great. I got to it just in time, since some of the low spots were starting to rust… But I scrapped with a screw driver and it exposed the metal and no pitting that i saw.

The worst part was the house carpet that I pulled out was installed wiht nails… And the leaky tran and or engine from before I owned it, has everything lubed up. I believe the paint bubbling was from the oil and what not.

I am going to a…