Choke vs. no choke

Hey guys, I just rebuilt my Thermo-Quad carb and while I was getting the linkage hooked back up one of the choke linkage pieces broke. I just removed the choke hardware (left on the fast-idle stuff though) and figured I could just run without one, but I don’t want it to be a huge hassle to start cold. BTW this is going on my mildly-rodded street 318. The main reason I ask is because it seemed like before when the engine had the stock 2-bbl. BBD the choke was barely needed even when starting…

Car stereo guru needed…..

I`m installing a new set of 6 x 9`s as well as a pair of 5.25`s in my car and the speaker manufacturer recommends using an additional amplifier in the 80-150 watt @ 4 ohms range to push the speakers. Can you car stereo guys recommend a good quality amplifier that won`t empty my piggy bank? Thanks

Idle Stop Solenoid

Anyone have a line on an original or rebuild service for my idle stop solenoid on the 72 340 Duster 4-speed? Thanks! D

Oil Dipstick wanted for Slant Six 225

Let me know if you have a 225 slant six engine oil dipstick. Somehow mine has broken off. Need one as soon as possible, please let me know! Thanks,

Timing cover and dress up???

Well……After replacing te NON-existant thermostst last week with a 190 degree on the wagon actually got to operating temperature and was happy….until I developed a Pressure leak between the Timing cover and the block on the top passenger side……Of course it had to happen just as I pulled into the Emergency room to get a cut finger stitched up…..Kind bad day all around. So I got a new water pump to put on and the correct hoses to replace those cheap spring filled flex hoses that rust…

msd 8534 8.8 wires

sb billet msd 8534 distributor and 8.8 wires 150.00 plus shipping pm me

Ontario Junkyards

Anyone know any good junkyards in ontario specifically the southern region Windsor to toronto area?