Classic Mopar Forums

Some time back I seen a post I think was from a member here about a fan clutch and fan that would help with a clearance issue for a 68 Dart or some other A body car. Need more clearance between the fan and radiator. I’m thinking the member was 70Duster440. The member posted the part number for the fan clutch and fan. If you read this could you please give those part numbers and what kind of car they were for. Any help would be appreciated. My email is ghei@tm.net

Here are the vitals:
http://www.stockmopar.com/mopar-fender-tag-decoder.php?Code1=&Code2=&Code3=&Code4=&Code5=&Code6=&Code7=&Code8=&Code9=&Code10=&Code11=&Code12=&Code13=&Code14=r11&Code15=v3x&Code16=v7x&Code17=end&Code18=a01&Code19=a04&Code20=c55&Code21=g33&Code22=j25&Code23=l31&Code24=r6&Interior=h6x&Code25=x9&DateCode=917&OrderNum=057957&Code26=e55&Code27=d32&Vin1=BH27&Vin2=P9B&Vin3=141259&vin=BH27P9B141259&Submit=Decode

The air cleaner is from a GTX, but the engine is a 340. Just…

You might have seen my blew up my Holley thread. Well I want to be able to take my demon to the Spring Fling but I need a new baseplate. They are pretty expensive new so looking for someone with a core. It’s an 1850-2 Holley 600 vaccum secondaries also I am located in Oceanside VS

Thanks for the help guys

Jeff

509-863-2617

Hi all:

Still working on tracking down a nice Super Six air cleaner. Must be the 70’s style with the a/c notch. I’ll consider all condition levels as I’d prefer to have an authentic Mopar cleaner and not slap on an aftermarket “chrome” one.

Send me a PM and let me know what you’ve got out there!

I need a complete sending unit for a 79-80 DODGE COLT. Not sure what other years would fit.

Thanks

Tom

I am looking for several stock Mexican 318 / #302 head castings number cores. To tell the differences the Mexican castings have a pear shaped water hole on each end of the chamber side next to the intake. Other 302 castings have a round hole.
My zip is 77510, please send a price if you happen to have some of these heads.
Thanks Jerry Davis

Hi guys, just a quick question.
I set my valves a few weeks back and i noticed that on some cylinders when both valves are closed some of the rocker arms can move from side to side a little on the rocker shaft (not much but there is definitely movement).

The rocker shaft and arms are set up properly, with the original spacers between each rocker pair and the correct separators on each of the bolts (small, large, small, large, small, if i remember correctly).

Anyway, i was just…