Classic Mopar Forums

Image: http://thumbs.ebaystatic.com/pict/190381850212_0.jpg (http://rover.ebay.com/rover/1/711-53200-19255-0/1?icep_ff3=2&toolid=10005&campid=5336346378&customid=&icep_item=190381850212&ipn=psmain&icep_vectorid=238401&kwid=902099&mtid=824&kw=rss)*US $19.99* (0 Bid)
End Date: Thursday Mar-25-2010 20:27:10 PDT
Bid now…

so my 68 barracuda has made it, and I need a few things to get her going.
I’m in Toronto area and would like to know what suppliers are good a-body suppliers in and around here. any help, of course is appreciated as always.
thx fabo mem’s

71/72 Roadrunner rear valence with Exhaust cut outs needed must be in good shape or and easy repaint.Thank’s:)

The 71 Demon I just bought is missing the jack, could use the entire assembly in restorable condition.

Thanks,

Mark

I ran across a Cordoba I think was a ’77 with a “P” engine code, it looked to be all in tact down to the dual snorkel air cleaner & it looked like a…

Hey Guys

I purchased a brake line kit fron Fine Lines and started installing the lines on the 8 3/4 but for some reason the pass side is too short and the drivers side is too long to go into the block on the rearend. I am not sure what the 8 3/4 is out of but I thought it was from an A-body?? It did have small bolt pattern axles/brakes and the spring perches seem to line up and are in origianly locations. Did they mount the brass distribution block in different locations on different years…

I have a 67 Dart with an msd 6al and a mopar performance distbutor. The ignition will not fire when the car is hot. The starter turns over plenty fast but no spark. If I wait 5 or 10 minutes the car fires right up. Even if you push start the car it cranks up. Its like the starter is sucking all…