Classic Mopar Forums

Hi everyone,
Facing wage reduction and/or possable layoff and with two kids in college I have decided to sell my project.

Vin #LM23H0R291167

Engine rebuilt and balanced over 3000.00 in recipts
Stamp on left side of motor: 2780930 340-1
I do not believe the motor to be # matching but not sure

727 transmission rebuilt

Image: http://thumbs.ebaystatic.com/pict/360347883869_0.jpg (http://rover.ebay.com/rover/1/711-53200-19255-0/1?icep_ff3=2&toolid=10005&campid=5336449812&customid=&icep_item=360347883869&ipn=psmain&icep_vectorid=238401&kwid=902099&mtid=824&kw=rss)*US $9.95*
End Date: Saturday Mar-05-2011 21:57:34 PST
Buy It Now for only: US $9.95
Buy it now…

*A couple of years ago I swapped a Harley (I had 2) for a 65 Barracuda. It was a /6 with factory 4 speed. It had already been converted to an electronic ignition with a NAPA control unit and an unknown distributor. The ignition does not use a ballast resistor.*
*It ran fairly well but the carb on it leaked, had a flat spot and was beyond repair. So, I decided to go V-8 and have a little fun*
*Recently, I rebuilt an old 273 with .030 over flat topped pistons, completely rebuilt heads and a…

Hello all,
Looking for a set of torsion bars 888 and 889 for a 72 Dart.

Thanks :
Joe

Any one here good on tuning Dominators. I have an 1150 on my 500 and wide open its bad ass but around town it loads up and stumbles. I think restrictors in the intermediate and bigger air bleeds are the way to go and was wondering where to get the restrictors. Summit sells the air bleeds and emulsion jets. So far I have tried power valves and was pig rich so plugged them and played with jets. I gotta get this thing dialed in. its sooting up the plugs ang shaking unruly at part throttle till i…

Does anybody know what size spark plugs fit the 1930 Dodge DC8? Are there any newer plugs that will fit and what brand and number will work? Thanks…

Hello. I build scale model Mopars. I am in the process of finishing the 1969 Dodge Scat Pack and found a Dodge News magazine from Nov. 1968 that had a copy of a poster that could be ordered. It was pschodelic themed saying “Five From The Hive”. I am looking for one of these poster or a copy to display with my buildups at the NNL East Model Car Show in April 2011. I have attached a copy of the magazine cover. Any help in aquiring one of these would be greatly appreciated. I have already…