Classic Mopar Forums

Gentlemen i just took my 67 gtx clone to the alignment shop after installing the rms alterkation and the i gave the tech the suggested settings he came back to me and said he could not put 6 degrees in the caster as was in the specs. when he finished i took it out for a test and as i was driving down the road each time the road surface changed the steering wheel would almost pull out of my hands and the car would dart to one side. i took it back and he said he would work on the caster. Is…

Hi,
This grille came with a ’77 Charger I picked up for parts. It’s still in a Mopar box and it’s really nice. Make me an offer. I’d rather see…

Got the 273 all together, primed, and the distributor set(I think, got recheck it). I had taken the distributor cap clips off, to paint the distributor(I know it is highly debated if the distributors were painted), the clips were perfect, no overspray and still had the original black finish. I put them up where I would remember where I put them, well guess what I forgot where I put them, DOH!!!!! I already had the garage cleaned in anticipation of the Dart coming home tomorrow, so don’t know…

I’ve got a line on a 5.2 Magnum out of a ’99 Durango I’m considering for my ’67 Dart GT, to replace the 273. I’d like to use it pretty much as-is with a pair of headers. I know I’ll need the computer and have the wiring harness modified, and there’s a guy over on Moparts.com who will do it for $250.

Any other special considerations I need to keep in mind? The wiring harness mods should cover the lack of an electronic trans. If I remember correctly, motor mounts bolt up. The radiator needs…

Below is the ad I listed on eBay — but I’m fixin to put them in the Free Classifieds

Its a rough one for sure, but its there. I have a bench seat out of a 70 Barracuda. No tracks. I have the hinge covers, just have to find them. Will…

http://cgi.ebay.com/ebaymotors/Chrysler-300-Series-F-1960-CHRYSLER-300-F-47-000-MILES-RUNS-DRIVES-/271183564214?pt=US_Cars_Trucks&hash=item3f23cccdb6…