Category: Racers Hangout
Setting Timing by vacuum :)
HI,
I saw a post a while back about timing by vacuum.. so I thought I’d try it today..I was running 17 HG of vacuum. Using a vacuum gauge I turned it up to max i could receive and it moved up to 18 Hg. max . Well it runs better starts better .. Not …
Racing in Colorado?
With Bandimere closed this is a big hit. Rocky mountain drag week lost Great bend, Bandimere and now Pueblo..Hopefully Pueblo comes back strong.
I will take postponed over closed!
HI, looking for some rear gears help
HI all,
I have a 75 fury with 318.
Looking to have the heads reworked with bigger valves,
Bigger cam ( I have a .440 IN,EX. in it now) but want to go better or bigger.
Carb is a 450 cfm QFT. Holly, well go bigger if have/need to..
Tires are P225 X …
Disaster, almost
First off let me state God was watching over me. In my last post we were in trans repair mode for the sprag. Now reinstalling the trans. Rotating the crank to install the 3rd converter bolt, crank stops, dead. Won’t move either way more than 2-3 degre…
One to many spin and tire shake on the sprag
Went to change the fluid and found a couple of familiar pieces in the pan. As expected, a sprag failure. Caught in time. It has the upgraded Super Sprag. Fortunately caught when it only damaged the spring cage and inner cam. Rest of the trans looks gre…
Motor-plate sealing recommendations
I’m installing the 572 this weekend and was having issues with the motor plate leaking at the water pump. What would be the best way to seal it up without worry of leaking?
Aluminum block / Motorplate / Meziere water pump / ARP studs
Felpro Gaskets o…
Does this look weird to you?
Just finished mini tubbing and relocate the springs on my 64 belvedere.
Moved the axle back about 1/2 inch, but I kind of think it looks odd, or is my brain just messing with me.
Tires are 29x15r15