Category: Circle Track Chat

Some of you are in our FB group Mopar Mafia Racing and already know about this deal I have put together to purchase all remaining stock Mahle had in inventory they had pulled from there parts list suppliers ordered from, so no one knew they had dead inventory. So with all this said I will have…

Hey Lon, a while back you had a clutch set-up to go from mopar to Chevrolet (saginaw) transmission. A guy I know on Facebook, Jody Cash, is looking for one of these. Do you still have it? If so, either send me a pm or contact me on Facebook. Bradley Q…

I’d like to find a set of small block Mopar WIDE sand cast valve covers P4876124… keep you eyes open.

Thanks.

Hey guys I run a Duster on 3/8 asphalt with a pretty large bank. We have been racing for 3 years and had good success with our 360. Out power everything out of the corner and in the straight. My question is how would a 318 compare? It is time to go through the engine and I wanted to build a spare…

need 360 .040 pistons with around +25cc dish for EQ 62 cc heads , block is cut to zero deck, .039 gasket to get 9 to 1 compression.

i believe speedpro has the H405CP…… probably have to go with custom pistons

I have a 360 block that was damaged by the previous owner. It is a 0.010″ oversize block to meet the Wissota rules for a Spec engine in the modified class. The block was dropped and broke a portion of the front webbing and the deck on number 1. The owner used a chemical weld and patched it back…

I just ran across a lot of circle track talk mixed in with other mopar chat articles How come they dont show up here?