Author: Dirt Track Dodge

need 360 .040 pistons with around +25cc dish for EQ 62 cc heads , block is cut to zero deck, .039 gasket to get 9 to 1 compression.

i believe speedpro has the H405CP…… probably have to go with custom pistons

i have a 76 Dart i race as a Hobby Stock, and having problems with a low pedal

wheel cylinders and calipers were replaced also tried several master cylinders.

what gives?

the car is pain to drive, can’t race in tight traffic

bleed the brakes , no sign of air

wtb 18 spline 4 speed thats rebuildable

nib, pair casting no. 4772576, bare……never used 700.00

got my Hobby Stock on the track….it was working good……its only been 4 years for me

going to roll on a new paint job this week end

in my hobby stock, what Master Cylinder , front calipers and rear wheel cylinders should i be using??

using 74 Duster calipers and rotors

proportioning valve?? i think it’s drum front and rear ?? ( 72 Dart 318 automatic originally )

ford 9 inch rear with 11 inch drums , need to get new wheel…

putting together some projects that have been laying around.

i want to assemble some SB Magnum heads, is there a valve spring from another make that would handle a .474 Purple cam that after the 1.6 rocker would be almost .500 at the valve?