Author: wedge5
Torsion Bars 4 racing?
By Old Hippie’s request I am posting this question.
I have replaced my smaller dia. torsion bars with larger one because the car was a street…
Stock Dana or built 8 3/4
OK, I am still beating this dead horse!:D Which is stronger? A stock Dana or a Built 8 3/4. This is what I plan for the 8 3/4: back brace,35 spline…
Motor Mounts for dragracing?
I have the Shumaucher poly mounts and their torq strap. Was wondering if I should switch over to solids. Was also wondering about a plate. Motor…
Headers for a 65 Coronet
I am looking at either the Doug’s 2” or TTI step headers. The motor has Eddy Victor440 heads,manual steering,727 w/floor shifter,non A/C,mini…
8 3/4 back brace welding
Getting ready to weld a brace on and was told by the dist. That after i disassemble the rearend I could just weld on the brace and don’t have to…
Spark Plugs ?
What plugs should I use. Hot,Cold or does it matter? 500 w/11:1 alum heads and 100 octane fuel. Used on the strip 99% of the time. As always I have…