Author: Stargazer

Guys, car functions fine, runs and starts good. Except for a small problem when running on LPG. I won’t bother you with that.

But because of that problem, I measured power at the ignitionswitch. And I wonder if the voltages it shows are normal.
The re…

Probably silly question, but were 69 Chrysler steering wheels perfectly round? The used wheel I got is wider than it is high…?
Before I start restoring it..

Hello Guys,

I bought used "Three Hundred" letters (1969) from a fellow member on this board. Now to mount them, I would like to know the exact measurements where to place.
Is there any information about this matter? It’s not in the service m…

Just now I discovered why I probably keep having issues with the HH motor/switchplate and doors assembly.

Keep getting power from “switchplate switch“ to motor, when that contact should be open. Motor gets hot etc..

I took the motor out of the car, a…

Guys,

the headlight doors where giving problems. Would not open anymore. Power to open and close the doors, and ground, to motor switch are as should be.
So I removed the motor/switch assembly from the car, and it looks like this very tiny spring (10…

Ok guys,

quick question,
how to lower the steering column on a 69 Chrysler? (I want to remove the instrument cluster)
I loosened the two bolts above the column, no movement. Then loosened the three bolts on the big plate above the column with no resul…

Searching the internet for passenger side mirrors for 69 C bodies,, I found this;
160-RHC Mopar A,B,C-body RH Manual Mirror

The picture doesn’t show if the mirror has the correct shape. Could this be the aftermarket mirror many of us would like to own…