Author: snook
1966 Dodge Coronet Post Sedan Project
I’m selling my project to make way for another Mopar that is near and dear to me. 1966 Dodge Coronet post car – can be had with the stroked 383 (432CID) and rebuilt 727 with a new PTC converter, new everything. Clean Florida Title in my name.
Here’s the thread on my progress so far:
https://www.forbbodiesonly.com/moparforum/threads/1966-coronet-post-maximvs-iii.185652/
I will sell as a roller for $20K or with the motor/trans for $25K, I can negotiate a little but really, this…
Mancini (Harland Sharp) vs Comp Cams Pro Magnum Roller Rockers Kits
First off, I don’t have a problem with the quality on either set; I bought the MRE/HS set first (MRE57001-15-714K) and then went to the Comp cams set – the Comp Cam set is far superior but they cost significantly more as well. $511 for the MRE/HS and a Summit price of $778.95 (1621-16) for the Comp Cams Pro Magnum shaft kit. The MRE/HS rockers have no offset, either intake or exhaust. Both sets come with all the hardware and are complete sets.
That said, the MRE/HS is for iron OEM heads…
Mancini (Harland Sharp) vs Comp Cams Pro Magnum Roller Rockers Kits
good set of cores for a template for new front/rear door panels for a 66-67 Coronet sedan (post) car
I need a good set of cores for a template for new front/rear door panels for a sedan (post) car.
Thanks, Chuck
66-67 B body front door panels the same for post and hardtop cars?
66-67 B body front door panels the same for post and hardtop cars? I have a Coronet sedan (post) car and am getting to the point of finishing the interior in the not too distant future. I know the rear door panels are different.
Thanks, Chuck
Air filter to fit 1969 unsilenced (no snorkels) air cleaner?
Anybody got a number? I ran across WIX# 42043 but published dimensions don’t seem to work.
Thanks, Chuck
383-440 NEW Aluminum Heads with Milodon Valves and Comp Locks/Seals
New MOPAR aluminum cylinder heads and parts for a B or RB Mopar engine (361-383-400-413-426W-440). Procomp PN# JM-MP-210-70 bare cylinder heads. These take a 11/32″ valve stem – the valves included in this auction are 3/8″; You will have to ream the valve guides to fit (there is plenty of meat to ream out to 3/8″). I decided to go a different route on my build, so my loss is your gain. $1200.00 OBO, shipped or $1000.00 if you come and get them. I’m in Okeechobee FL
These are…
383-440 NEW Aluminum Heads with Milodon Valves and Comp Locks/Seals
1966 1967 Coronet 440 Glove Box Door – NICE
I have a nice glove box door in really nice shape, Coronet 440 bezel is in really nice shape as well, see attached pics. It’s on eBay right now: https://www.ebay.com/itm/255044128552
$75 + shipping
Thanks, Chuck