Author: Moespar

Looking for the brackets/hardware that is used to mount the auto shifter mechanism under the center console. Also, could use the metal plate for the center console, automatic.
thanks

When doing the front bumper tuck, I’ve read that the heavy steel reinforcement bar from behind the front bumper is not use.
Is that true? also, anyone with more advice on slotting the brackets etc. I would really appreciate your help. thanks

I need left front bumper brackets for 73 Challenger. Thanks

I need a pair of the gray bumper fillers for up front. or even just a drivers side . Thanks

So I’m getting this 440 block ready for the machine shop, and I was thinking about removing the dowel pins that locate the cylinder heads. I noticed the diameter is 1/4 but there appears to be a larger hole in the deck. So that would mean the pin is …

So I had the rear end jacked up, both tires off the ground, no drive shaft in the car, no engine or tranny in the vehicle yet either. wanted to see if the 489 was a sure grip. I rotated one rear tire forward, expecting and hoping to see the other re…

So I bought a 73 challenger today, been wanting one for 30 plus years. Found it in OK shape, everything seems to be there. Except the engine, and maybe some other minor parts. Here’s my question, as a newb, but someone who has been reading up on the 73 challenger…. This car has the correct fender tag (matches the VIN how it should), and I see an A57, so I want to assume this was a Rallye, and the engine was originally a 340, according to the VIN. but there are no side scoops on it, and…

73 Challenger Rallye or not?