Author: jct
carb/timing issue when cold
it tends to backfire thru the carb and dies/stalls out when the motor is cold, it’s fine soon as it’s up to temp.
my timing is set to around 7.5° btc, point gap is around .015, dwell is around 26°
how do i stop it from being problematic when it’s col…
What window is this from?
Cleaning my garage. And wasn’t planning on cleaning under the the work bench that came with the house. No other markings besides the standard safety glass so i don’t really know what vehicle or came off of looks like right rear window from something.
My ranco heater control valve took a dump
All cause i wanted to use the ac. Thankfully i have the rubber valve that needs replacing somewhere at home. The pita part is removing it from the car, thankfully i have an screw impact driver to remove the screws this time around
View attachment 4…
I’m pretty sure it’s a ground issue
68 newport custom With parking lights on my left turn signal indicators on the dash and on the fender is dimmly lit, it goes away when the headlights are on.
Right side cornering light isn’t lighting up bulb is good. Left side works. Used to work not to long ago.
I did upgrade my headlight wiring harness and upgraded my headlights with H4 and H1 bulbs and hella fixtures
Think it might be my headlight switch? I haven’t gone behind the dash in a couple of years now.
I did a thing
Finally have a garage to work in with 3 inches in front to work around but it fits, which I knew it would. And was the huge selling point for me!
View attachment 414016
Fixed one issue another popped up
Fixed my over heating issue due to a intake manifold gasket leak.
Now it seems like it’s choking for air. Already changed the condenser and reset the point gap. No change, i have plenty of fuel and air filter appears to be clean enough. Even with the air filter off it’s choking for air. Everything was fine before this happened back in early May
It sort of stumbles from a stop