Author: HotRod20
1970 Duster Valiant Grille emblem original
Excellent shape, no pits, driver quality emblem correct factory part # 2949 473. has both mounting studs.
$48.00 shipped to lower 48.
Check or money order only No Pay pal.
Hotrod20
View attachment 1715837716
View attachment 1715837717
…
Main Cap # 5 for LA 318 or 340 68-72
Need a couple of rear # 5 main caps for my 340 build. Factory 1972 Parts book says 318 and 340 # 5 cap is the same part number. Would like to find a couple nice ones to see what fits tighter in the blocks cradle. Let me know.
Thanks
HotRod20
Used 340 Flywheel for internal balanced engine
Need a used 340 steel crank 0 balance flywheel (no balance weights attached to it) for use on an engine break in stand. Using the Factory crank with 6 bolt holes.
Anyone have one laying around they wont use? Cheap?
Thanks,.. let me know.
HotRod20
Suspension assembly question for strut rods
I replaced the entire front suspension on my 72 Scamp with Moog parts.
I repalced the stock strut bars with the heavy duty Mopar Performance strut bars. These things are beefy…
Seems now I can’t get the lower control arm assembly pivot studs to fully seat against the K frame.
At Present, I have the Lower control arms stud nuts loose until ride height is set, and the front and rear nuts to snug up the strut rods.
I have installed new strut rod bushings also.
I am wondering if I torque…
67-69 Dart Parts
Helping a buddy of mine trying to get his 69 Dart done.
He is in need of upper the metal trim strip along the windshield at the headliner.
He needs the two rubber bumper strips behind the rear bumper that attaches to the body.
He needs the rear 1/4 window tracks and structure assy. The P.O. cut out all the metal
for the rear side windows to make it a race car. My friend wants to weld the structure back in to get the side rear windows to work.
He’s Looking for a parts car, or a back half…
1968 smallblock valve covers, 273,318
Just pulled off these valve covers from a 1968 318 in junkyard. Engine was in a Polara. Nice, Dent free, gasket lips are straight and not cracked. Looks like they were never removed. They need cleaning and paint,then you can bolt them on.
$125.00 plus …
Torque spec for 73-76 upper ball joint on an A body with big balljoint
Can anyone check their FSM for 73-76 A body ball joint torque specs?
I only have earlier FSM’s and they say 55ft.lbs. for the small ball joint.
I have the large ball joint and cant find a torque spec. Appreciate it and
Thanks
Hotrod20