Author: GregDaro

New in the box OER crush can.
$80 including shipping in the US.

I have a 70 Challenger with factory AC. The AC is not working and I want to remove that mongo compressor. Bought a non-AC pulley but the diameter is larger than the AC pulley and it hits the crank pulley.

I cannot find a smaller diameter pulley with…

I need the passenger side molding that holds the felt in place for a 1970 Challenger convertible. Note, the second pic shows the driver side with the molding in place.

70 Challenger Convert – need 4 fine thread rear belts bolts.

Can anyone ID this disk brake caliper? It is on a 1970 Challenger and as you can see, it is new. I have searched the number but have found nothing. It looks very much like the original for 1970, but it is also similar to what GM used.

The service manual calls for 6 on the left, 5 on the right with 2 half leaves forward of the axle. Most of what I have seen spewed for this car is 6 and 6. Mopar performance hdx seem to be 6 on the left and 5 and 1 half on the right.

What should the…