Author: cudanut jim
fuel sending unit problems
Glad this forum is back in business. I had to put a new fuel sending unit in my 1970 Cuda because the weld around to fuel tube broke and fuel was leaking out. The gauge was working perfect. I bought one at Jegs for $42 and when I still have about 8 gallons left the gauge reads empty. I found a…
flickering lights
My 1970 cuda converted to electronic ignition . I bought an MSD 6A ignition box. Everything works except when I rev the engine all the lights flicker and the aftermarket voltage gauge jumps a volt. I temped in a jumper from the battery to the blue ignition field on the alternator and the flickering…
cuda running bad
My 1970 Cuda has a 360 with a Holley 4150 750 cfm carb. and expensive Holley fuel pump. I filled the fuel tank with 93 octane Marathon gas. Started to drive at a steady speed down the road to a destination about 3 miles away. The farther I drove, the rougher the engine ran. Started sputtering…
1970 cuda max. tire width size
I’m considering buying new wheels and tires for my cuda. I now have 14″ factory magnums with 235/60 14 tires. I would like to go to 15″, as the 14″ seem to not fit the wheel well correctly. I’m looking at classic Cragar S/S rims. I would like the maximum size front and rear if anyone knows. Thanks
1970 cuda max. tire width size
I’m considering buying new wheels and tires for my cuda. I now have 14″ factory magnums with 235/60 14 tires. I would like to go to 15″, as the 14″ seem to not fit the wheel well correctly. I’m looking at classic Cragar S/S rims. I would like the maximum size front and rear if anyone knows. Thanks
1970 cuda max. tire width size
I’m considering buying new wheels and tires for my cuda. I now have 14″ factory magnums with 235/60 14 tires. I would like to go to 15″, as the 14″ seem to not fit the wheel well correctly. I’m looking at classic Cragar S/S rims. I would like the maximum size front and rear if anyone knows. Thanks
1970 cuda max. tire width size
I’m considering buying new wheels and tires for my cuda. I now have 14″ factory magnums with 235/60 14 tires. I would like to go to 15″, as the 14″ seem to not fit the wheel well correctly. I’m looking at classic Cragar S/S rims. I would like the maximum size front and rear if anyone knows. Thanks