Author: booyaballer

All,

when I got my 70 challenger, the parking brake handle was bent as pictured. I’ve checked the service manual but can’t seem to find my answer. Can anyone tell me if I can simply replace the handle/rod portion of the brake mechanism? if so, wher…

All,

At some point I will replace the wiring and install an American Autowire harness on my 70 Challenger. I am an absolute novice and the only thing I know is to not put a butter knife in an outlet. Nonetheless, I will take on the challenge. To th…

anyone know what type of "sealer adhesive" (putty like material) is used for the airshield (plastic) that’s afixed to the quarter panel?

Thanks!

is a 70 challenger (340) supposed to have a radiator overflow tank or does the overflow hose just run out the bottom of the car ?

thanks in advance!

My 70 challenger has a 360 engine. My temp gauge seems to be toward the high end. I would expect it should be around halfway. Does anyone roughly know what the temp would be at the midpoint and high point? i used a laser temp reader and it says 180…

I want to replace the valve covers on my 70 challenger which has a 360 crate engine. I’ve looked online and only AMD seems to have a set that have the breather holes in the center. does anyone know of any others with the same holes but cheaper? Than…

I’m replacing the battery cables on my 70 Dodge Challenger (360 crate engine). the current red wire to the starter is about 43" long but only says 100% copper on it. it also has an accessory lead wire (12") that goes to the solenoid. and th…