Author: admin

Hello,
i’m searching pics from 71 Demons in different colors.
Preferred are pics from Demon 340’s in high impact colors with and without vinyl roof.

bought something for a finishing touch

Attachment 36169 (http://www.forabodiesonly.com/mopar/attachment.php?attachmentid=36169)

I had thought about making something then I seem this in a Jeg’s catalog

Attachment 36170 (http://www.forabodiesonly.com/mopar/attachment.php?attachmentid=36170)

what do you think?

68/69 Barracuda cluster with gauges $200
The condition of the cluster is okay. I have painted it with some
rather shinny chrome paint, that does reflect. The area around the
radio is chipped a little, and the mounting for the screw near the
glove box is broken on the back. The only other issue for the front
panel is an area on the driver’s side that I repaired with epoxy,
when installed it is not visible. All in all the front of the cluster
is 95% perfect, it just needs to be painted or…

I need the bit to drill out the spot welds on my floor pans.
I would like to know if anyone has a prefernce or has used one that worked well.
I have looked at Eastwood and that may be what I end up with. So any thoughts, suggestions, or better ways to get these pans out?

Like the title says I’m after a water pump pulley for a BB and AC that will work with a 3 groove crank pulley. I know for a fact that the shallow 2in or less will work for me? Anybody have any?

Hi,
my name is Sven and i’m a Mopar Guy from Stuttgart in Germany.
I have a 68 Plymouth Roadrunner 383-4bbl with a TF727,
which i imported 2006 from Texas to Germany 8)
My 2nd Mopar should be a A-Body and thats why i’m now here :read2:

Here are a few pics from my Runner

Image: http://i113.photobucket.com/albums/n204/SPS-Mopar/68RR/68RR1.jpg
Image: http://i113.photobucket.com/albums/n204/SPS-Mopar/68RR/68RR2.jpg

Two guys were drving their little 2 seater econobox on the freeway in the left land going 55MPH to show the public that the spped limits were to be…