Author: admin

Looks like Aaron’s two-year old HP Pavilion he got for college has already crapped out. The HP support line tech had him go through a couple of phone diagnostic checks and seems to think the motherboard is done for. Aaron’s cousin has gone through two motherboards on his same-model laptop. What’s up with HP? I always thought highly of their products. We spent this weekend comparison shopping for another laptop.

Are any of you trained in computer repair? I would like some knowledgable…

Looking at a car up there and needed some help. If your willing can you PM me.

Edie

Putting a ’68 Valiant 225 into a ’64 Dart. Do I need to save the pan off of the ’64 225 or can I just pitch the engine?

Does anyone know if the single lower puller that Year One sells for the 70 – 74 SB Mopar will work on a 68 – 69 Engine. I dont know if the depth of the pulley will be correct. What im doing is the Engine was an A/C Power Steering Engine and the car is a Non P/S non A/C car. So all the pulleys ive got are for A/C P/S . Can I just buy the single lower pulley that Year One sells and will the offsets be close and use my water pump pulley, or do I need to get a new water pump and crank pulley, a…

I need the vacuum fitting that goes in the intake manifold for the hose to the booster for a 66 slant 6.

thanks Greg

Is it normal for spark plug threads to be wet when you pull them out? I can’t tell if its oil or just fuel residue but every plug I pulled (440) was a little wet on the theaded part.

There are no stupid questions right?

Hi All,

I have a question. Last week my 66 /6 strated giving me some headaches.
It would stall out a and skip when idling in drive. And in park, not as much. I was noticing that my ampmeter was excessivly charging when I was cruising along. So I replaced the wires, plugs and rotor. Did comprsession test. After I did the parts replacement, the next day,I was on my way to the Endicott Auto show in MA. and it was running great. then and I was taking the turn into the show the meter started…