Author: admin

Are you doing better or worse compared to 2 years ago.

Yes or no.

With you anwser please indicate 10 % up to 150%.

Thank you very much in advance ya’ll.
Kutacando.

Simple question, are the trunk lids the same? Say a 69 Dart.

Well, I lost 2nd gear for the 3rd time!

So I am looking for reasonably priced trans with in 100 miles or so of Indianapolis.

Leads are appreciated too.

Or volunteers to go to pik a part with me to pull one or two 😀

got all this today good deal and i have no idea what i will do with it most is from the 50s alot is still new in the box

When I step on the pedal in my Aspen the pedal feels normal, but the pedal stays down after a take my foot off, and the brakes stay applied. I can pull the pedal up, and the brakes release. I’m not sure where to start. Pedal linkage? Master cylinder? Booster(seems doubtful)? Collapsed hose?
I’ve never encountered this before. Anybody have any suggestions where to start? Anybody have this happen to them?

Oh yeah, the car is a 79 Aspen, 318/904 with power brakes. Totally stock 79,000km…

Help ….lol, Picked up a 741 case with a 489 pumpkin, the axles are 5 on 4, can I take the axles out of the 8 1/4 rear that is on the car. The one in the car must be from a police unit, the rims have the slots and it has the 10 X2.5 brake pads, would like to be able to use these axles …any advise would be great …. -35 below today, do not want to go out and rip it apart but really want to know. Later

My ’69 Dart came with a new 380HP 360 Mopar crate engine when I bought it a couple of years ago. I’ve been collecting parts since then and hope to get it together and on the road in 2010.
I planned on going through the crate motor anyway to verify all is to spec. Now I’m thinking of maybe a head change and possible stroker build using the same cam that came with the motor. From other threads I’ve seen the Mopar hydraulic roller cam was Mopar # P4876348. The Mopar advertised Duration is…