Author: 330dTA

Heavy Duty Universal Joint for a ’70 New Yorker?

 330dTA  September 15, 2018

Which would be correct? Rockauto gives two alternatives regarding the yoke outside diameter, one with 2-1/8″, and another with 2-5/8″. Mancini Racing does not give diameter, but instead refers to 7260-style, and 7290-style. I am not familiar with these, and the garage is too far away (200 mls) for me to go check and measure. I suppose they are referring to same thing, the diameter, but which one would be correct? Or better still, would either one fit? (If so, I will take the thicker one, of…

Heavy Duty Universal Joint for a ’70 New Yorker?

Opinions on Holley Avenger 770cfm?

 330dTA  August 27, 2018

My engine builder is finishing up my 440, and it was time decide upon the carb. I reread the carb threads, but found zero input on this particular one.

The engine is a ’68 block with a steel crank and stock 906 heads. It is supposed to be rebuilt to approximately the 440HP level: .030 over, light weight KB237KTM pistons to slightly above 1 to 9.0 compression, Edelbrock Performer Plus 2192 cam (204 int./214 exh. @0.50, range 0-5500rpm) for low-end torque, and Edelbrock Performer 2191 intake…

Opinions on Holley Avenger 770cfm?

1970 Chrysler New Yorker 2d HT, $19 900

 330dTA  November 26, 2017

Not mine, but nice:

View attachment 153767

View attachment 153768

View attachment 153769

View attachment 153770

View attachment 153771

View attachment 153772

View attachment 153773

View attachment 153774

…

’69-’74 (i.e. Early Style) Road Wheel Caps

 330dTA  July 15, 2017

I need a set of four, but I’d be delighted to get even one. (I suppose if I can’t find a decent set, I could use just one as a model to make 3D printed metal copies.)

I have a set of the later caps, driver quality, and am willing to trade them in, if needed.

Thanks, Jaakko

’69-’74 (i.e. Early Style) Road Wheel Caps

 330dTA  July 15, 2017

I need a set of four, but I’d be delighted to get even one. (I suppose if I can’t find a decent set, I could use just one as a model to make 3D printed metal copies.)

I have a set of the later caps, driver quality, and am willing to trade them in, if needed.

Thanks, Jaakko

1970 Chrysler New Yorker 4d HT, 9000 original miles

 330dTA  May 28, 2017

For sale at Old Time Classics, Antioch, IL:

Used 1970 Chrysler New Yorker For Sale

View attachment 126258

View attachment 126259

View attachment 126260

View attachment 126261

View attachment 126262

View attachment 126263
…

For Sale 1970 300 convertible_triple white_$3500

 330dTA  August 5, 2015

What do you say about this:

http://minneapolis.craigslist.org/hnp/cto/5154991611.html

“This is a triple white 1970 chrysler 300 convertible 440…