hi there to all you mopar guys and girls i havent been on in a long time .after 12 or 13 years on the same engine 400 big block stock with a mopar 284 528 solid cam .in my circle track duster it broke a valve in the main as i was going for the lead bummer. now i am putting a 360 together stock rods arp bolts balanced 0 deck kb pistons after market vibration dampener .i have the choice of to oil pumps stock or hi vol . and the cam not sure what to run i have 273 adjustable rockers and push rods for solid or hyd we have a 500 lift limit .the heads are 1974 360 heads with 202 in 160 ex stainless .i have magnum heads to put together but that takes money i dont have right now .the track is a long 3/8 short 1/2 mile asphalt with some bank to it .we run street stock tires 8 in wide.they hook pretty good .i have 355 gears and run in 2nd gear .aluminum duel plain intake 500 cfm 4412 carb . the oil pan is the same one i had on my big block i just modified it to go on the small block that was fun . cant find a center dump circle track pan any place . oh ya i think i would like to turn about 6200 to 6500 RPM .any help on what cam .witch oil pump .and a center dump CIRCLE TRACK PAN to try would be great thanks .mopar vince
