Author: Titan1969

Thx in advance for any advice.
I have an issue with the pass. rear tail light is melting the housing.
I have replaced the rear lens with new and the platics is thinner than I remember ( resto shop replaced the housing) on older cars.
The black plastic …

Thx in advance for any advice.
I have an issue with the pass. rear tail light is melting the housing.
I have replaced the rear lens with new and the platics is thinner than I remember ( resto shop replaced the housing) on older cars.
The black plastic …

Thx for feedback everyone. I have a 73 Cuda with factory front and rear sway bars. Im at a minimum going to replace the rubber however will the factory swaybars lose spring/tension with age like torsion bars do? I understand torsion bars are under cons…

Hi everyone, thanks in advance. I have a 73 nearing completion of restoration and I want to add the factory side stripe/sticker.

The car is factory 340 Auto and I prefer the 340 hockey puck decal however if its not correct for a 73, I wont use it.

Ca…

Thx in advance. ITs been a while since I have installed exterior trim molding so looking for any pics to guide me.

I ordered the hardware install kit in the pic and have 3 trunk trim pieces to install.
Trunk lid edge trim and one left trim and right…

Hi everyone thanks in advance.

I have been chasing an issue that is constant when I apply the brakes the pass. front disc has a fairly loud rubbing/squeaking noise.
I have…

Stock Rims and Disc Brakes
Checked 3x for metal shavings or signs of abnorm…

I wanted to share a few of my experiences on replacing the power brake booster on a 73 Cuda.

I purchased the picture rebuilt booster from Oriellys, it works well ( way better than 50 year old booster) but I had a few issues on install.

I pulled the o…