Author: thpa
Belts, Chrysler 300 1966, 383
Hi guys,
I’m having a few problems with my belts right now.
I’m not sure if the right ones are installed.
The belt for the power steering pump is currently a XPA 982 LW. The adjustment is set to the stop, but the part doesn’t really sit very tight….
Chrysler 300, 1966 … engine cuts out at full throttle
I’ve come across a new issue, and maybe one of you can help?
I replaced one of my V-belts as it had snapped, and during the test drive, I noticed a slight pop and the engine suddenly shut off when I applied (almost) full throttle.
I was able to rest…
3D model, Chrysler 300 taillights, 1966
Has anyone ever thought about scanning the rear lights of a Chrysler 300 using 3D technology?
It should then be possible to reproduce the parts using 3D printing.
Grant steering wheel on tilt and telescope column, Chrysler 300 1966
Hello guys, I have a 1966 Chrysler 300.
Recently, I bought a Grant steering wheel (Grant Products 967-0 Grant Classic Nostalgia Steering Wheels | Summit Racing) and the following adapter Grant Products 4310 Grant Steering Wheel Installation Kits | Su…
missing cover? Chrysler 300, 1966
In my Chrysler 300 (year 1966), there seems to be a missing cover on the left and right sides of the rear seat bench.
I can only find the lower side filler, but nothing for the upper area.
Does anyone know what should go there?
Windshield Wiper – Chrysler 300, 1966
The reserve function of my windshield wiper is no longer working.
When I turn off the wiper, it just stays in place where it is.
Where is the best place to start or look for the problem?
Is it a common problem?
Thx in advance.
1966 Chrysler 300 – steering wheel shaft wobbles
Hi guys,
i have a Chrysler 300 1966 and i recently fixed the horn … so i had to pull down the steering wheel.
Since that i noticed that my steering wheel wobbles and found out that the shaft is not fixed (anymore).
I found some plans here where the…