Author: Seb'74

Hi C-Bodysts,
Again with the French Fury. This time, a part is missing. On the firewall (vehicle cabin side), there is some kind of door or trap that closes the blower motor location next to the heater box assembly (engine bay side). Please have a look…

Hello everybody,
I need to replace the blower motor resistor.
I found one on Ebay, and I want to make sure it’s the good one. Here is the link :
Mopar NOS 1974-78 C-Body Heater Blower Motor Resistor without A/C 3503342 | eBay

Can anybody confirm me it’s the same as my one (pic below)?
It seems to be the same…

The French Fury and her blower motor resistor / pt 2

Hello guys,
I just purchased a new blower motor, and I have to connect it to the wiring.
On the left, the old one, and on the right, the new one.

View attachment 413809

How can I remove the wires from old connector to re-use the connector on the new motor wires? Is it at least possible? I tried to insert a very small flat screwdriver, but the connector seems very fragile.
Or do I have to purchase a new connector, if yes, any lead appreciated, because in France, there’s no way I can find…

The French Fury and her new blower motor

Hello Friends,
I managed to remove the blower motor. I’m gonna replace it, it’s not turning freely. I want to replace the resistor too, but I can’t find it at RockAuto, and Autozone seems not to have for our year’s cars. I think of replacing the relay too, and I’ll have a full system with brand new parts. Anybody has the part numbers, or links to purchase these parts? I also purchased the 74 body and chassis manuals, but due to healthcare general lock down, I don’t know when will I receive…

Blower motor and resistor (1974 Fury)

Hello Friends,
I’m looking for a dual exhaust line for my 74 Fury Gran Sedan. I searched a lot on the net, but it seem quit hard to find something for 74 and up. Lots of stuff for pre-73. Looking for something universal. 400 ci, Torqueflite, no air-cond. Anybody have a link or some leads?
Thanks for your help friends!
Sebastien

Hello friends,
How can I remove the wide metal sheet on the top of the dashboard (the one with the vents and central loudspeaker grille)? Is there a way to remove it without removing the whole dashboard?
Thanks for your help,
Sebastien

Hello friends,
I have to replace the gears of the windows motors. I replaced the driver’s one, but when removing the motor, I broke the compensator spring (“clock” spring?).
1 : where can I find it?
and 2, most important : is there a way to remove the WHOLE assembly, instead of only the motor? It would be easier to work on the motor,
Thanks, Sebastien