Author: rsh1966vip
Adjusting the idle on 4 barrel 400 engine in my 1966 VIP (changed out of course)
I posted this question yesterday, but now I do not see the post anywhere , so I will re-post it.
I posted a picture of the two idle screws and asked for advice on making adjustments. I was asked to post pics of both sides of the carb. One thing happene…
Advice on adjusting the idle 1966 vip with a 400 in it
Do I turn the screw counter clock wise to reduce my idle RPMs?
thanks
1966 plymouth VIP……Richard
Advice on adjusting the idle 1966 vip with a 400 in it
Do I turn the screw counter clock wise to reduce my idle RPMs?
thanks
1966 plymouth VIP……Richard
San Luis Obis visit
My wife and I will visit our daughter in San Luis Obis Sept. 13 to 16. If there are a couple of fellow forum guys that would like to share their car or car project, please pm me. I would enjoy taking a look.
thanks
rsh1966 vip
I have the 66 Plymouth VIP in the upholstery shop and I have a couple of questions.
1. The passenger side rear window issue: the metal piece that the window sits in is bent toward the back of the window. This bend (looks like 1/2 to 3/4") takes the window out of alignment (see pic @ red mark). I have no idea how the previous owne…
66 Plymouth drivers side window came loose for the chrome trim
What should I use to re-attach the chrome trim to the window? I have two products. One is 3M molding tape, but I think that will be too thick a aguge. The other product I have is Super Weatherstrip Adhesive (Permatex). Any additional recommendations? s…
66 Ply. vip heater leaking at the bottom of the heater box
Walked into the shop and found a puddle under the 66. Long story short, I found a leak coming from the bottom of the heater box. It is a good thing that I have all the carpet already stripped out. So, I have a couple of questions:
1. How do I bypass th…