Author: PLY478

That is the length? Where are you measuring from?

1979 Aspen Station Wagon 360/727 with an 8.25" rear.

Thanks
PLY478

The main caps are in order front to back. 1-2-3-4

Numbers 2 & 4 Main Caps have the windage tray main stud bolts.

Look at the block main on #3 The groove for the thrust bearing machined into the block.

Then look at the #4 Main cap. There is th…

Looking for a set like pictured.
Dent and oil caked crud free would be nice.

Let me know what you have.

Thanks
PLY478

View attachment 1715708632

Looking for a set like pictured.

Dent and oil caked crud free would be nice.

Let me know what you have.

Thanks
PLY478

View attachment 42584

Will buy out-rite or trade for the ones I have.

Mine are the taller ones from the nut up. Shorter from the nut to the threaded end.

So I need the shorter ones from the nut up, and longer from the head to the threads. So they thread farther up in the block.

Let me know please to finish a build.

Thank PLY478

Picture Note’s: I have the Darker bolts on the left, I need 4 of the ones on the right with the yellow pointer.

View attachment 42464

Will buy out-rite or trade for the ones I have.

Mine are the taller ones from the nut up. Shorter from the nut to the threaded end.

So I need the shorter ones from the nut up, and longer from the head to the threads. So they thread farther up in the block.

Let me know please to finish a build.

Thanks PLY478

Picture Note’s: I have the Darker bolts on the left, I need 4 of the ones on the right with the yellow pointer.

View attachment 1080578