Author: Ohiowoodchuck

Looking for the weatherstripping holders that go around the door and take 13 screws. These are not reproduced and I need a set. Please pm.

Looking for black a pillar trim both sides
The full 8 piece interior trim set that goes around windows headliner etc.
both kick panels in black
Both fender splash shields.
Both mirrors. Prefer paintable ones.
Please pm me if you have anything.

Can anyone tell me how many 318 speed cuda’s were built and how many 4 speed cuda’s were built. Would a four speed ever have been put behind a 318. I’m interested in the actual cuda model. Also can anyone tell me if the factory stripe that ran the full length of the car was painted on or a decal back then.

I’ve been researching cylinder heads and such for a little while. People say the magnum heads and block are a good choice. Is the magnum heads and block only available on the 89-92 360’s or I’ve seen some say you can go up to 2007. I’m a little confused because everything unread gives different years.

I was wondering what kind of hp gains a person could pick up by bolting on a set of w2 heads vs a set of let’s say j heads. Would you see any gain or would a cam change be in order to get maximum hp out of the setup. Would a person normally go with a higher lift cam if they did the swap. I’m just trying to see if anyone has a apples to apples comparison or if it’s even possible I figure, based on my reading and from my experience pulling cummins powered diesel trucks that a higher…

Let’s talk about 340 heads.

Looking for a lh fender for a 74 cuda in or close to southern ohio or somebody willing to ship one.

I recently bought a 74 cuda that’s in pieces. Besides the obvious body work that needs done. The thing is completely tore apart and put in boxes. Can anyone recommend some service manuals or diagrams that have part numbers and locations of the parts.