Author: notacuda

Hi all. Does anyone have install instructions for 71-72 acc pedal hardware? The accelerator unit is already installed in the car. Thanks in advance.

Afternoon all, I’m installing my rear sway bar on my 72 Barracuda. It came off of the car so I know it should go back on. I’m having problems bolting the bushings on the long bolt. There is no thread to screw the nut on. If I squeeze the bushings together i can see the threads on the bolt. I’m working on my own so short an extra hand. any suggestions???
It looks like there is only one way to put the sway bar on. Right or wrong?
Thanks in advance.
Tom

Good afternoon again. I’m still looking for the correct red paint that is on the grill of my 72. Any help will be appreciated.

View attachment 73027

Good afternoon all; looking for the correct red paint for the trim on my 72 Barracuda. I tried Totally Auto but I’m getting no response. See attached pic.
Much thanks in advance.

View attachment 63431

Hi all, I’m looking for a good used or NOS a/c liquid line for my 72 340 Barracuda w/air. It’s the line that runs from the condenser to the drier on the passenger side, p/n 3502233. The one I received from a Florida firm is not the same configuration as the one I took off and can’t find when I stripped the car. It needs to a horseshoe loop around the charcoal canister and w/w reservoir. Any leads/help will be greatly appreciated.

Can anyone help me find a clip that goes on the end of the carb/transmission rod kick down lever. My car is a 71 Barracuda 340 , 727 transmission, all factory. My parts catalog shows p/n 2946640 b/c crank to carb rod. Any help would be appreciated!!
Tom

Help, help!!!
The 72 Barracuda I’m restoring is missing the bracket for the water valve. I’ve done some research and the hole locations on my fender well show that the attached bracket (pic) is correct. I have other brackets, but I don’t want to drill new holes. Any help locating one similar to the pic would be greatly appreciated.
Tom

View attachment 38372